Specifications

42
PPPOE user name and password: Fill in the PPPOE user name and password
provided by the Internet service provider.
When one ADSL line is connected to one DVR only, you can select Internet
connection in the PPPOE mode, when the ADSL modem will connect the DVR
directly. Then press “Enter” to select PPPOE in the connection mode to enter the
PPPOE Setup screen. After entering the broadband user name and password,
click “Enter” and the system will restart. After that, the DVR will establish a
network connection in the PPPOE mode automatically. After successful
connection, the IP on the IP address will be modified to the acquired dynamic
WAN IP address automatically.
Media port number: the port number used in the private protocol
communication between the DVR and the PC end, usually being 9000 by default.
If this port of the PC is occupied by any other service, please modify it to an
unused port.
WEB port number: the http port, usually being 80 by default. If the
administrator modifies the WEB port to any other port, such as 88, you have to
postfix the IP with the port number, and enter “http://192.168.1.19:88” in the
address bar when accessing the DVR via the IE.
IP address: allocating an IP address depending on the network environment of
the DVR
Subnet mask: filling in a subnet mask in depending on the network environment
of the DVR
Gateway: Setting the gateway depending on the network environment of the
DVR. If there is no router device in the network, please allocate an IP address on
the same network segment. If there is a router device in the network, you have to
set the corresponding gateway.
DNS: setting the IP address of the domain name server (DNS varies from city to
city); you can refer to the domain name server configurations of the PC.
DDNS Setup
Click “DDNS Setup” to enter the following screen: