Specifications

38
6) If the program is installed in the SD card, please find the icon “Wireless
Monitoring” in [Applications], as shown in the right figure above:
7) The screen that appears after this icon is selected and run is as shown in the
left figure above:
The operations of the above buttons are as follows:
Channel 1 Channel 2 PTZ: Up PTZ: Left Zoom+ Focus+ Aperture+
Channel 3 Channel 4 PTZ: Down PTZ: Right Zoom– Focus– Aperture–
[Play/Stop], [Full Screen/Normal], [Capture], [Setup], [Next Group], [Exit]
Note: The capture file is saved to the default installation directory, namely
the system CD, by default, with the following path "C:\Data\Images\”;
In case of 8-channel DVRs, click “Next Group” to change over to Channels
5-8.
8) If you are using it for the first time or need to modify the parameters, click
the [Setup] button to enter parameter setup, as shown in the right figure above:
Default access point:
The Internet access point can be selected, which is usually GPRS by default, as
shown in the left figure above:
Server address: