Specifications

35
4
/
8
-
channel Embedded Digital Video Recorder
now; automatic connection can be realized after selection.
z [Connect] button, used to connect the real-time video screen of the set
channel.
z [Setup] button, used to set the parameters of mobile phone monitoring.
The functions of the buttons below the window from left to right in turn are:
[PTZ Direction Control (Left, Right, Up, Down)]; [Area Selection (Zoom In,
Zoom Out)]; [Focus (Up, Down)]; [Aperture (Up, Down)]; [Capture].
Note: To control the PTZ with your mobile phone, make sure the PTZ parameter
settings on the DVR (see 3.7.6 “PTZ Setup”) are correct, and then change over
the channel at the mobile phone end to the corresponding video channel to
control the PTZ.
The capture file is saved to the installation directory
(“Programs—>QQeye—>Photo Folder”) by default.
6) If you are using it for the first time or need to modify the parameters, click
the [Setup] button to enter parameter setup, otherwise click [Connection] directly
to enter the monitoring screen, as shown below:
User name: admin by default.
Password: The same as the IE access password, Off by default, which means you
can log in with any password. To enable the password, see 4.10 “IE login
password” in this manual.
Server: the IP address or dynamic domain name of the public network connected