Specifications

32
A. Turn “On” the corresponding channel in the “Channel Switch” option;
B. Set the sensitivity level as necessary, usually set at 3 or 4;
C. Set the motion area of the corresponding channel in the “Area Setup”
option;
D. In the “Recording Mode” screen, set the corresponding channel to “On” in
the “Channel” option;
E. In the “Recording Mode” screen, select “Timing Recording” in the
“Recording Mode” option, also click “Record Time Configuration” to enter
the Record Time Configuration screen and set the corresponding time to
alarm recording (see timing recording in “Recording Mode” for the setup
method).
After the setup has been done and motion detection triggered, a red letter “M”
will appear in the screen of this channel. See “Alarm processing” in Section 3.6.1
for alarm processing.
3.7.4 Mobile phone monitoring
The mobile phone monitoring function of this series DVR is supported by mobile
phones of the Windows Mobile and Symbian operating systems, such as Dopod
P660, Nokia N78 and Nokia 95.
The operating procedures are as follows:
I. Setup method of mobile phone monitoring at the DVR end:
Enter the following screen from “Main Menu” →“Advanced Functions”
→“Mobile Phone Monitoring”: