Specifications

30
address to your mailbox supplier.
Sender address: the mailbox address used to send mails, the above-mentioned
SMTP server is also the server of the corresponding sender address.
Sender password: the password of the mailbox used to send mails.
Receiver address: the address used to receive the picture transmitted after the
DVR motion detection alarm. If the alarm frequency of the system is high, the
number of pictures sent will also be larger. Please pay attention to the space of
your mailbox timely lest the normal operation of the mailbox be affected due to
an excess number of pictures.
3.7.2 System info
Enter the System Info screen from “Main Menu”—“Advanced Functions”, as
shown below:
You can inquire about the software version number, whole unit version number,
MAC address and serial number in this screen.
3.7.3 Motion detection
Enter the Motion Detection screen from “Main Menu” “Advanced Functions”,
as shown below: