Specifications

13
4
/
8
-
channel Embedded Digital Video Recorder
Note:
1. If harddisk is failed to be installed when DVR mainframe is power on, or the
newly installed harddisk is failed to be formatted on the mainframe, the red
“H” logo will be shown in video pre-view picture.
2. The newly installed harddisk must not be used until formatted in the
equipment as follows: main interface > harddisk management > harddisk
formatting. The system will be restarted after completion of formatting.
2.3 System login
The DVR initial code is 000000 without any password, the user can log in main
menu directly. For better safety of equipment operation, the administrator can
enter system “Basic Settings” – “User Password” to change the code and
password of this equipment. You can set ordinary user password and
administrator password, the administrator has all the operating privileges,
ordinary users only have limited choices, and they can only monitor and video
search/ playback. (the mainframe will match automatically when you enter
password, and different permissions will be given according to different
passwords).
If you want to operate in mainframe menu after password is set, the system will
display “user login” interface:
Equipment code: it is just ok to enter equipment code “000000” displayed on
right side in corresponding input box. The defaulted code will be guided to the
number box when mouse operation; we recommend to set mainframe password
when remote controller is operating many equipments, to divide through targeted
equipment code input, or the remote controller will disturb the adjacent
mainframe.
2.4 Shortcut menu