Operating instructions

32
INSTALLER
INFORMATION
Figure 51: Ember Placement
Figure 49: Burner Tray
Burner and Tray Installation / Removal
Burner Tray Installation /
Removal
Installation
Place the burner tray in the fireplace.
Turn off main gas supply to unit and
connect 3/8" flex tubing and power cord
from inner firebox . Secure tray with
screws placed around the perimeter of
the tray using a screwdriver, as seen in
Figure 49.
Removal
Remove the screws seen in Figure 49
using a screwdriver. Turn off main gas
supply to unit and disconnect 3/8" flex
tubing from inner firebox. Also disconnect
power cord from inner firebox and
remove the burner tray.
Burner Installation / Removal
Installation
Place the burner in firebox so that the
venturi is over top of the orifice. To
secure the burner, insert the screws as
seen in Figure 50 using a screwdriver .
Removal
Remove the screws as seen in Figure 50
and lift the burner out of the unit.
Figure 50: Burner
Embers Placement
Place embers chunks in rock tray as seen
in Figure 51. Do not block air openings
and pilot elements with embers.