ESPRIT 616/626 KEYPADS U LISTED User Manual Model 616 READY ARMED 2ND 1 2 3 4 5 6 7 8 9 TRBL MEM BYP 0 10 CLE AR 11 Model 626 Y AD RE AR ME D 12 STAY AWAY ENTE R ESPRIT P S E C U R R I T Y D S Y PRINTED IN CANADA S O T E M X S P S E C UM616-626 980130-0006 U R R I T Y D S Y S O T E M X S
UM616-626 ESPRIT BURGLAR ALARM CONTROL PANEL Welcome to the world of ESPRIT technology. Your Esprit control panel has been designed with ease of use and simplicity in mind. We’ve developed a highly advanced technology control panel with powerful features that ANYONE can use, without memorizing complex, confusing codes or taking a course in computer programming!! Not only is ESPRIT easy to operate, with many functions accessible by one touch of the keypad, but it’s also functional and stylish.
UM616-626 UM616-626 office/warehouse buildings, or apartment/condominium complexes. Look Everything you need to know about your security system is clearly and simply displayed on the Esprit keypad. The keypad diagram at the end of of this manual provides you with an excellent introduction to the roles of the keypad function keys on both the Esprit 616 and 626 keypads.
UM616-626 UM616-626 entered on the keypad, the sounder emits a continuous beep tone. User Codes 01-16, or 01-48 (on control panels software version 3.00 and beyond) can be programmed by your installer to arm/disarm the system, activate [STAY] or [AWAY] arming, and zone bypassing. These codes can also be designated to arm/disarm only System A zones, only System B zones, or both systems by your installer.
UM616-626 UM616-626 Each access code is made up of 4 or 6 digits (programmed by your installer). The master code 474747 and user codes are identified by a 2 digit "code number". 3) Key in 4 (or 6) digits of the user code number and press [ENTER]. The “CONFIRMATION” beep will be heard again. The [ENTER] key will flash. A four (or six) digit user code has been entered into memory. You may continue programming other user codes, or press [CLEAR] to exit programming mode.
UM616-626 UM616-626 order to arm the system. This light will only illuminate if all zones are closed. All doors and windows must be closed, and there can be no movement in areas monitored by motion detectors. Once the "READY" light is on, enter your user code. If you make a mistake entering your code, the keypad sounder “END/REJECTION” beep will let you know. Just press [CLEAR] and re-enter the code. dows protected, or the basement, or perhaps all the zones on the perimeter of your home or establishment.
UM616-626 UM616-626 for the "READY" light before “Stay“ arming, however all zones that have been programmed by your installer to arm in "Stay" mode, must be "closed" (no movement in the zones when arming the system). *On control panel models 728, 728 EXPRESS and 738 EXPRESS using software version 2.1X, keys indicated will not flash, but will be constantly illuminated. Software versions 2.2X onward, keys indicated do not illuminate. However, if system is “Stay” armed, [STAY] key will illuminate.
UM616-626 UM616-626 house, or for any other reason you need to leave a zone open. If a component of your security system is damaged, it can also be bypassed until repairs are made. Manual bypass arming instructs the control panel to ignore zones that you designate “open”, so that the rest of the system can still be armed. (Based on your instructions, only zones that your installer has programmed “bypass-enabled” can be bypassed during manual bypass arming, “auto-bypass (Away)”À arming or “Stay” arming.
UM616-626 UM616-626 Note: These features are not recommended for regular use because leaving zones open can reduce the efficiency of system protection. (Force arming and auto bypass away arming are ideal for use with overhead garage doors!) Based on your needs, your installer can program these panic zones to generate audible alarms (sirens or bells) or silent alarms, both of which also can be sent directly to your central security station.
UM616-626 UM616-626 A zone belonging to a “common area” is a zone that is armed only when both systems are armed, and disarmed if “System A” or “System B” is disarmed. Note: "System A" codes can stop sirens coming from "System B" zones (and vice versa), but will not disarm a system that is in alarm.
UM616-626 UM616-626 Programmable output Not only does your Esprit control panel provide top security, it also offers you total convenience. Your installer can program the panel to reset smoke detectors & Glasstreks, to activate strobe lights, to activate light switches in your home or office, to reduce or increase building temperature, turn on/off air conditioning, open/close automatic garage doors, and more.
UM616-626 UM616-626 in memory. Pressing on any key except [2ND] will return the keypad to normal zone display. Key [3] AC power failure (Control panel software versions prior to 1.4) If AC power is not being supplied to the control panel, key [3] will illuminate. AC trouble can be excluded from keypad "trouble display" by your alarm installer. Trouble conditions will remain in "trouble" memory. Pressing on the [2ND] key displays current trouble conditions.
UM616-626 UM616-626 Key [8] Timer loss If the system timer is not functioning, usually after total battery and AC power failure, key [8] illuminates. The timer should be reprogrammed after total power loss. ty company. Please make sure to contact your alarm company, however, to ensure that repairs are immediately made to your security system. To reprogram the timer (control panel software versions prior to 2.00): Press [ENTER] + master code/user 1 code + [MEM].
UM616-626 UM616-626 Providing a Fire Warning System Household fires are especially dangerous at night. Fires produce smoke and deadly gases that can overcome occupants while they sleep. To warn against fire, smoke detectors should be installed outside of each separate sleeping area in the immediate vicinity of the bedrooms and on each additional story of the family living unit, including basements. automatic notification to those who are to be depended upon for the rescue.
UM616-626 UM616-626 KEY ACCESS PROGRAMMING Several control panel features can be programmed quickly on the keypad, without entering any programming addresses or section numbers. [TRBL] Call Espload via telephone If programmed by your installer, this initiates communication to the central monitoring station computer using Espload software. Select “one-key access” programming mode by pressing [ENTER], followed by master or user code 1.
UM616-626 IMPORTANT: Keep this information in a secure location.
UM616-626 ACCESS CODES Name Code Arming Priority l 4 digit l 6 digit Reg.
UM616-626 SPECIAL KEYS AND FUNCTIONS l Key [10] Regular arming is activated. l Key [STAY/11] “Stay arming” is activated (Arms system A only, when partitioning is enabled) [1] and [3]* Police or l Silent l Audible l Not Used UM616-626 Your Entry delay 1 is may enter through zone # seconds and you . Your Entry delay 2 is may enter through zone # seconds and you . Your siren, if activated by an alarm, will sound for minutes.
UM616-626 Programmable "chime" zones Press any key for 3 seconds to activate (intermittent beeps) or de-activate chime zones (continuous beeps) Use key [8] to chime program keypad zone. READY Green LED must be "ON" (all zones closed) to "regular" arm system. When it flashes, exit delay is in progress. READY ARMED 2ND TRBL MEM BYP 1 2 3 4 5 6 7 8 9 0 11 10 AR ARMED Red LED illuminates when system is armed. 12 STAY CLE AWAY ENTE R UM616-626 9 Press for 3 sec.
UM616-626 IMPORTANT This security system should undergo frequent testing. However, despite regular testing, and due to, but not limited to, criminal tampering or electrical disruption, it is possible for this product to fail to perform as expected. WARRANTY Warranty conditions for the Esprit may vary from country to country. Please consult your local dealer for complete warranty information.
