User`s manual

Esprit Keypads 9
3.7 KEYSWITCH ARMING
A keyswitch can be used to arm your system. If an
alarm is generated in your system, or a zone that has
not been defined as a Stay zone is opened after
panel arming, the system can only be disarmed from
a keypad (if keyswitch is defined as “Stay” arming).
3.8 MANUAL BYPASS ARMING
This feature arms the system while bypassing zones
you wish to leave unarmed.
By using the “bypass recall” feature, you can reinstate
the latest zone bypass instructions saved in memory.
Press [BYP] in Step 2 (see above) and the previous
bypass status will be re-established.
3.9 FORCE (AWAY) ARMING
To arm the system rapidly without waiting for the
How do I Manually Bypass Arm the system?
1) Press the [BYP] button and then enter your User Code.
The [BYP] key will illuminate as well as any zones that
have already been bypassed.
2) Enter the number of the zone(s) you wish to bypass.
To “unbypass” a bypassed zone, enter the zone num-
ber of the bypassed zone.
3) Press [ENTER]. Arm the system using desired method.
The [BYP] key will remain illuminated to indicate that
there are bypassed zones.