Installation manual

12 Reference & Installation Manual
Part 4: PROGRAMMING METHODS
The 748+ Control Panels can be programmed using either the keypad or the Espload Software. We highly recommend
programming the control panels using the Espload Software, as it simplifies the process and reduces the potential of data entry
errors. You can also program the control panels manually by using a keypad.
4.1 Espload Software
With the Espload Software, you can program the 748+ family of control panels remotely via modem or locally using an ADP-1
adapter. The advanced Espload software can execute fast uploads or downloads and provides many powerful features. These
include a comprehensive "monitoring" mode to oversee all panel activity, a "scheduler" to initiate pre-programmed tasks at set
intervals, and a "batch" mode to carry out pre-programmed tasks following a call from the control panel. Using Espload there is no
limit to the number of account files or panel defaults created and you can assign thousands of programming combinations to the
PGM outputs. Espload can also be converted to the language of your choice. Contact your local Paradox Distributor for your
FREE
copy of the Espload software.
4.2 Keypad
When programming, use the supplied "Programming Guide" to keep track of which addresses were programmed and how.
Before you begin programming the control panel, we recommend you read sections 5 through 11 of this manual in order to
acquire a good understanding of the control panel and its many features. When programming with the keypad, certain addresses
are programmed using different methods. These methods are described in detail below. Each section in this manual will
reference the appropriate programming method.
4.2.1 Hexa Programming
Addresses 000 to 043 and 300 to 527 are programmed using the Hexa Programming method. In this mode, you can
enter any hexa-digit from 0-F where keys [1] to [9] represent digits 1 to 9 respectively; the other keys represent hexa-
digits A to F as shown in Figure 22. To program using the Hexa Programming method:
1)Press [
ENTER] + Installer Code
2)The [
ENTER] key will flash indicating you are in programming mode
3)Enter the desired 3-digit address
4)The keypad will display the 2-digit data currently saved at this address as described in Figure 22
5)Enter 2-digit data; after entering data you do not need to press enter, the software will automatically save the data
into the selected address
6)Return to step 2 to continue programming or press [
CLEAR] to exit programming mode