User's Manual

COMPUTER RADIO CONTROL SYSTEM
3.1 Voltage supply
When designing the on-board wiring for your project, always pay
attention to the voltage input range of your receivers and servos.
You can connect supply voltage to the Duplex receivers as
follows:
- directly from the batteries
- via a BEC voltage regulator (either contained in speed
controllers or self contained)
3 Installation
Basic Data
Rsat900
Rsat900 NG
Dimensions [mm]
40x22x7
40x22x7
Weight [g]
11
11
Antenna length [mm]
2x300
2x260
# of channel outputs
3
3
Temperature range [°C]
-10 to +85
-10 to +85
Supply voltage [V]
3.5 – 8.4
3.5 – 8.4
Average current [mA]
70
50
Real time transmission of telemetry data
Yes
Yes
Programming
DC/DS/JETIBOX
DC/DS
Support satellite receiver Rsat
No
No
Power output [dBm]
14
14
Receiver sensitivity [dBm]
-110
-120
Frequency [Mhz]
863 - 870 (EU)
902 - 928 (US)
863 - 870 (EU)
902 - 928 (US)
2.2 Receivers 900 MHz
7
EN
Receivers RSAT 900 and RSAT 900 NG are not compatible!