User's Manual

COMPUTER RADIO CONTROL SYSTEM

Classic setup of a single receiver

(for any analogue/digital servos)

- servo impulses are generated on servo outputs

- each output can be assigned to one of the groups from A to H

- servo outputs assigned to one group are generated at the same

time

- between two consecutive servo groups there is a delay of 2.5ms

9 Examples of Rx setup

Classic setup of a single receiver (for digital servos)

The second receiver as a backup (clone mode)

- monitors existing connection between the transmitter and the

receiver in "Normal" mode

- does not support telemetry (or an indication of the signal

strength)

- works in receiving direction only, it never transmits

- any number of receivers in Clone mode can be operated

simultaneously

FailSafe

SignalFaultDealy

OutputPeriod

Rx mode

Enabled

1.5s

17 ms

Normal

FailSafe

SignalFaultDealy

OutputPeriod

Rx mode

Enabled

1.5s

Auto

Normal

FailSafe

SignalFaultDealy

OutputPeriod

Rx mode

Disabled

1.5s

17 ms (or Auto)

Clone