User Manual

ManualsBrandsEsprit Model ManualsToys & GamesReceiver/transmitter for radio control model toys

Table Of Contents

Manufacturer: Esprit Model

3998 FAU Blvd. Suite 310 Boca Raton, FL 33431 Tel: 561-961-5585 Fax: 561-961-5587

Certification Exhibit

FCC ID: ONTJETIR18US

IC: 10491A-JETIR18US

FCC Rule Part: 15.247

IC Radio Standards Specification: RSS-210

ACS Project: 12-2163

Manufacturer: Esprit Model

Models: JETIR18US, JETIR14US

User Manual

Summary of content (5 pages)

PAGE 1
Certification Exhibit FCC ID: ONTJETIR18US IC: 10491A-JETIR18US FCC Rule Part: 15.247 IC Radio Standards Specification: RSS-210 ACS Project: 12-2163 Manufacturer: Esprit Model Models: JETIR18US, JETIR14US User Manual 3998 FAU Blvd.
PAGE 2
The JETI DUPLEX EX series of receivers are designated to operate with the JETI DUPLEX EX transmitters using the 2.4GHz band. Thanks to the fully digital and bidirectional communication between the transmitter and receiver the Duplex EX system offers many new features and concepts for the remote control pilot.
PAGE 3
Installation: Wrap the receiver with soft foam and position it as far as possible away from potential interference sources (servos, electric motors, ESCs). Orient the active ends of the antennas 90° from each other and as far away as possible from each other. The minimum bending radius of the antenna cables should not be smaller than 1 cm (.39”). The active antenna parts must remain straight and should be kept as far as possible away from metal or carbon fiber parts.
PAGE 4
For receivers we grant a warranty of 24 months from the day of purchase under the assumption that they have been operated in conformity with these instructions at recommended voltages and that they were not damaged mechanically. Warranty and post warranty service is provided by the manufacturer. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
PAGE 5
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help.” Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada.