User Manual

computer radio control system
EN
4. 4.
2. Proportional Settings
Press the „F2 (Prop)“ button to make the selected device control
have either proportional or non-proportional control input. This
setting will not be available for all control devices.
For example, you have selected a 3-positon switch for your airbrakes.
If you select:
• Non-proportional – The brake can have only two positions
• Proportional – The brake can have up to three positions
3. Reversing
Press the „F3 (Rev)“ button to change the control device activation
direction.
This will not reverse the output direction of your function. It will
simply reverse the direction of the control device. (stick,
switch,knob)
4. Removing the Switch Assignment
Press the „F4 (Clr)“ button to clear (remove) the selected control
device from your function. You can then select another control
device if you wish or press the „F5 (Ok)“ button to return to your
function’s menu without assigning any control device.
Once you are happy with your control device seletion and
configuration, press the „F5 (Ok)“ button or the „3D control“ to
confirm.
85