User Manual

computer radio control system
EN
mechanical damage.
Large Memory – 4GB memory space for storing models, sounds, and
telemetry data.
USB Connector – convenient connection to your PC. Fast firmware &
sound upgrades, telemetry data downloads.
Fast Navigation – 3D wheel-style interface combined with function
keys allow for speedy navigation within the DC/DS-16 menu.
Digital Trims – fully programmable trims and a revolutionary
automatic trimming function.
Swappable and Assignable Switches – all of the switches on the
DC/DS-16 transmitter (2- or 3-position) can be easily moved and
assigned to create a custom configuration that works best for your
application.
Programming – the logical and intuitive transmitter firmware is
designed to be simple to use. Just follow the step-by-step screens.
The creation of a new model can be accomplished with just a few
easy steps.
Sounds/Alarms – the DC/DS-16 transmitter is equipped with audible
alarms and also allows the use of user-recordable alarms and sounds
to keep you fully informed while also keeping distractions to a
minimum.
To make navigation faster, the DC/DS-16 transmitter Instruction
Manual has been divided into 5 basic groups:
1 . Introduction and product support.
2. Basic description and mechanical adjustments.
3. First time switch-on. Basic helicopter and airplane set-up.
4. Advanced programming. Detailed descriptions.
5. PC upgrade/upload, safety information, and special mixes.
Important parts of the instructions are separated from the text and
highlighted according their importance.
Advice Note Warning
Advanced modelers may want to begin with group 3 where you will
get all of the basic information for model set-up. This is the quickest
way to understand the basic ideas of the DC/DS-16 transmitter
programming and with this basic information you can begin to
create your own model. More advanced programming functions are
found in group 4. This is where you can find detailed descriptions of
1.1.
1.2 Table of Contents
7