User Manual

computer radio control system
EN
as an “x” or check mark.
1) Setting Example
If you have installed the optional stick with a button in your left or
right stick, scroll thru the Control No. Menu line and pick the function
switch “Sk” or “Sl” if the button switch is installed in your right stick.
Pick one of the “Type of Control” switch options:
• “2-Position Switch”
• “3-Position Switch”
• “Button”
For any functions assigned to the chosen switch, knob or stick; any
preflight initial position can be programmed.
4. 4.
9.3.3 Wireless Modes/Trainer
The transmitter RF modules can operate in one of three modes. For a
detailed explanation. (see: section 5) The wireless RF setting is
programmed to the memory of individual models (receivers). While
programming a selected model you will need to configure the RF
module settings. The only exception for the system is the “Trainer”
mode. If the particular model has been programmed in Trainer
mode, this setting will not change if the Tx is turned ON or OFF.
For safety reasons, the “Trainer” RF mode will be automatically be
switched to “Initial” RF mode when a different model is selected in
the transmitter.
DS/DC-16 radio systems are excellent tools for instructor pilots. Basic
training for a student is not different than flying his own model. Both
the instructor and student have their own Jeti transmitters, all
communication between the transmitters is done wirelessly. The
instructor decides when to give control of the model to the student
and when it’s time to step in. The instructor’s primary transmitter RF
module communicates with model and the secondary RF module
communicates with student’s transmitter. The Student’s transmitter,
if set to “Student” mode, disables its secondary RF module and uses
only the primary RF module to communicate with instructor’s
transmitter.
Other brands of transmitters can be used by the student with a Jeti
Duplex EX 2.4GHz radio system by using a special wireless “Trainer”
communication module by Jeti.
64