User Manual

Table Of Contents

computer radio control system

2.2.

4.7. PPM Output Connector

The PPM output is accessible via connector labeled „B“. This

connector features the non-stabilized battery voltage output in the

range of 3,2V - 4,2V (max. 1A) which can be used as power supply for

the connected HF module as well as for the PPM signal output. The

transmitter output functions are in the form of a standard PPM

signal.

1. Reserve pin (do not connect)

2. Positive pin

3. Negative pin

4. PPM signal output (3V logics)