Users Manual

ManualsBrandsEsprit Model ManualsToys & GamesReceiver/Transmitter for Radio Control Model Toys

computer radio control system

The „Model“ menu contains basic functions for working with your

model, like:

• Select Model

• New Model

• Basic Properties

• Mosel Image & Color

• Functions Assignments

• Servo Assignment

• Servo Setup

• Device Explorer

9.1 Model

9.1.1 Model Selection

The menu displays a list of your models stored in the memory with

their names, setup dates and model types. The currently selected

model is marked by a check mark. In the menu you may select a

model and manage all of your models. You can copy models, delete

models (except for the currently selected model) and change the

storage sequence of your models.

1. Model selection

In the list of models, select the

required model and confirm it by

pressing the "3D button“ or

"F1(Ok)“ button. You will be

prompted to confirm loading of the

selected model.

The DS-12 transmitters offer a

4. 4.

"Model checking“ function, which compares the series number of

the receiver in the model profile with the series number of the

receiver with which it is starting to communicate. If the two series

numbers do not match, the transmitter displays a warning that a

different receiver has been detected for the model. In this situation,

you the user will decide whether to:

• Confirm the change – this assigns the new receiver to the model.

• Reject the change – the transmitter will not communicate with the

newly detected receiver and model will not be switched on.

ź Select another model from the transmitter register. The

information about receiver discrepancies will also be displayed

after the creation of a new model and binding or establishing

communication with the receiver.

Through the use of this function, if you choose, the new receiver will

be assigned to the given model for future checks.

2. Model description

Model description (a "label" parameter) has been added to the

Model – Basic Properties menu. The label is then shown while you

browse the model list withinthe Model Selection menu. The label

has an informative meaning and should be used to distinguish

between similar models.