User Manual

computer radio control system
EN
Recommended connection for Rsat900 as a backup receiver
with a Central Box
• Always connect the RSat2 or R3/RSW as the primary receiver in the
“RX1” slot of the Central Box.
• The RSat900 is connected to the " Rx2 " slot of the Central Box
• Both receivers are set to EX Bus output.
Connecting the RSat 900 directly to a Primary receiver :
• The RSat900 receiver is plugged into the “Sat1” slot of the primary
receiver.
• The RSat900 receiver is set to PPM output and the primary
receivers “Sat1” slot is set to PPM input.
RC Switch Magnetic Switch
SERVO
Rsat2 (Rx1)
SERVO
Rsat 900 (Rx2)
SERVO/Sensor
input voltage
4-8.2V
EX BUS
EX BUS
sat 900
SATELLITE RECEIVER
I
/
0
E
1
SERVO
Rsat 900 (Rx2)
PPM
SERVO
9 channel receiver
SAT
9
Ext.
BATT
A2
A1
sat 900
SATELLITE RECEIVER
I
/
0
E
1
3.3.
40