User Manual

computer radio control system
EN
9.5.7 FM Tuner
The FM Tuner application is able to tune and play a station at chosen
FM radio frequency. Before using the application you need to insert
an external antenna into the FM antenna plug.
Using the „F1” and „F2” buttons you can seek the next and previous
FM station (88-108MHz).
The „F3” and „F4” buttons can be used to find the station manually,
each time with 0.05MHz increment.
9.5.8 User Applications
In this menu you can see the list of user applications that are enabled
and running for the current model. The user applications should be
located on SD card in the /Apps folder. Basically, these are scripts
written in Lua programming language that can be run directly inside
the transmitter. Up to 10 applications can be run simultaneously.
You can activate additional applications from SD card by pressing he
"F3” Add button or, in case the application is no longer needed, you
can deactivate it using "F4” Delete button. Both these actions will
not change any contents of the SD card, the application will only be
installed or uninstalled from a model memory.
The "F1” CMD button redirects you to the Debug Console – from
where it is you can investigate possible application issues.
The "F2” Refresh button reloads all user applications and restarts
the Lua session.
For further information about the Lua application programming
please refer to “JETI DC/DS-24 Lua Programming API” document that
can be downloaded at www.jetimodel.com.
For proper use of the FM tuner, an external antenna has to be
inserted into the PPM Jack connector.
4. 4.
131
PPM OUT
PPM IN
Ground/ FM ant.