User Manual

computer radio control system
EN
4. 4.
Using the 900MHz Backup
The backup Tx module can be enabled in all wireless modes to allow
better link redundancy and safety. Just check the Enable 900MHz
Backup. You can bind the 900MHz receiver in the same way as
standard Duplex receivers.
1. Insert bind plug to the 900MHz receiver
2. Turn on the receiver.
3. Highlight and press the „Pair backup Tx module“ option.
4. If the receiver is found, a sound notification will be played.
It is possible to set an audible alarm that will be triggered in case the
2.4GHz loses link during flight and the backup module takes the
operation (see the System -> System Sounds menu).
Disable RF Transmission
You can manually disable the wireless transmission by pressing the
"F1 button” followed by a confirmation of the choice. The RF system
turns Off automatically when the USB connection is activated.
Caution: If you disable the transmission with a model attached,
you may cause a signal loss alarm.
106