User Manual

computer radio control system EN





9.5. S y st em

- Use this menu to configure the system functions of y our
transmitter. All of the settings in this menu are global and do not
change when you switch bet w een models .












9.5.1
C onfigura tion
Basic transmitter settings



1
2
1. Language S etting
U se this menu to select the transmitt er ’ s language setting .
All of the transmitt er ’ s text and sounds will changed based upon
your selec tion.
Warning: After changing the transmitter ’ s language you need to
turn the transmitter off and back on for the change to
take effec t .

2. U ser Name
Enter the user name that you want to appear in the U ser block on the
deskt op .
3. Stick Mode
T he transmitter supports Modes 1-4. To change the stick mode y ou
can either use the „3D button“ to highlight and select the line it em
or simply press the „F3“ button. Either will take you into the Stick
Mode
menu . Use the „F1-F4“ buttons to make your selection and
then press the „F5(Ok)“ button to confirm. T he mode change will
only be effective
f or new models . All of your stored models will r etain
their existing stick modes .
4. Sound
P r ofile
This item allows you to select the sound profile for your transmitt er .
3
4
This determines how your transmitter will audibly c ommunicat e
5
with y ou . Y ou can select between; quiet (mute), beep only, beep and
6
voice (sound file) or voice (sound file) only .
5. Date and
T ime
7
8
Here is where you set the current date and time . T he DC/DS-16 will
10
automatically observe the time change for Daylight Saving T ime .
T he time and date information is used when creating new models
and f or t elemetr y .