User Manual

4. 4.
computer radio control system EN


  


3. Emulating a 3-Position S witch
Y ou can use the logic function “Multi” to allo w the logic switch to ac t
as a 3-position switch. T he “Multi” logic function can combine the
output
from two 2-position switches to create a logic switch with
three output c onditions .
same time they will play at the same time and their sounds will
overlay each
other .










Switch 1 Switch 2
T he result of the oper a tor
 
A

ND O

R M

ulti
    
   

    

9.3.5 Sounds on E v ent (Sound Assignments)
Y ou can assign an audio file to be played based on any transmitt er
condition. This means than any music file stored in the transmitt er
can be assigned to any switch, stick, k nob , logical switch, alarm or
any other special function. Since you can also upload music files the
the DC/DS-16, you can fully customize how your transmitt er
communicates with y ou . If multiple sound files are triggered at the
1. Sound Switch Assignmen t
Select the
“Switch” menu item and assign the switch that you want
to use to trigger the sound pla yback .
2. Select the Sound File
Select the
“File” menu item and select the sound file that you want
assigned to the switch. T he available audio files are stored in
Dir ec t or y/A udio . This is important to remember if you upload y our
own files .
3. Sound Playback Delay
T he playback of any sound , after activation, can be delayed b y
editing the “Dela y ” menu it em.
4. Sound
Repea t
This menu item allows you to repeatedly play any sound after it has
been activat ed . This can be useful if your selected sound ’ s pla ying
time is shor t.