User Manual
Table Of Contents
- Manufacturer: Esprit Model
- DC-DS-16-EN-Part 1.pdf
- DC-DS-16-EN-Part 2.pdf
- Stránka 18
- Stránka 19
- Stránka 20
- Stránka 21
- Stránka 22
- Stránka 23
- Stránka 24
- Stránka 25
- Stránka 26
- Stránka 27
- Stránka 28
- Stránka 29
- Stránka 30
- Stránka 31
- Stránka 32
- Stránka 33
- Stránka 34
- Stránka 35
- Stránka 36
- Stránka 37
- Stránka 38
- Stránka 39
- Stránka 40
- Stránka 41
- Stránka 42
- Stránka 43
- Stránka 44
- Stránka 45
- Stránka 46
- Stránka 47
- Stránka 48
- Stránka 49
- Stránka 50
- Stránka 51
- Stránka 52
- Stránka 53
- Stránka 54
- Stránka 55
- Stránka 56
- Stránka 57
computer radio control system
EN
9.2.4 Dual Rate/Exponential
This menu allows you to set up dual or triple rates for any of your
created output functions. Any of the channels can be set with
dual/triple rates and custom exponential settings. Exponential
settings can significantly increase your control precision by making
your stick movements (around center point) yield less control
movement. At the same time, the end points of the control surface
throw can be set to its extremes.
4. 4.
Pressing the “F1 (Sym.)” turns ON/OFF the lock which allows each
output to be adjusted either together (symmetrically), or
independantly.
2. Trim Travel Global or Separate Setting
The servo trim position for each function output can be set either
collectively for all flight modes by selecting the “G-(globe symbol)”
or individually for each separate flight mode by selecting “S-
Separate”.
Channel namea)
Dual/Triple rate travel settingb)
Exponential settingc)
Global or separate flight mode settingd)
By highlighting one of the channels and either pressing the “F4
(Edit)” button or by pressing the “3D Control” button you will
access the individual control‘s settings page.
Channel name and global/separate setting
a)
Current switch positionb)
c
d
a
b
a
f
b
c
d
e