User Manual
Table Of Contents
- Manufacturer: Esprit Model
- DC-DS-16-EN-Part 1.pdf
- DC-DS-16-EN-Part 2.pdf
- Stránka 18
- Stránka 19
- Stránka 20
- Stránka 21
- Stránka 22
- Stránka 23
- Stránka 24
- Stránka 25
- Stránka 26
- Stránka 27
- Stránka 28
- Stránka 29
- Stránka 30
- Stránka 31
- Stránka 32
- Stránka 33
- Stránka 34
- Stránka 35
- Stránka 36
- Stránka 37
- Stránka 38
- Stránka 39
- Stránka 40
- Stránka 41
- Stránka 42
- Stránka 43
- Stránka 44
- Stránka 45
- Stránka 46
- Stránka 47
- Stránka 48
- Stránka 49
- Stránka 50
- Stránka 51
- Stránka 52
- Stránka 53
- Stránka 54
- Stránka 55
- Stránka 56
- Stránka 57
computer radio control system
EN
You reach the basic menu from the main display by pressing the
„menu“ key.
1. The main menu is divided into a basic and a user section. In
the basic menu, the menu items are divided into sub-menus.
• Model
• Fine Tuning
• Advanced Properties
• Timers/sensors
• System
9 Main menu
2. You enter into the user sectionof the main menu by pressing
the F3(User) button. In this section you may create a custom, user
defined menu according to your needs.
3. In the basic setup the
menu contains no items.
4. By pressing the „F5(Edit)“
button you will enter into the User
Menu Setup section.
5. The numbers on the left side
of the display shows the sequence
of the menu items.
6. With the „F1“ and „F2“ buttons you may change the sequence
of the selected menu items.
7. With the „F3(Add)“ you will create a new item in the user
section of the main menu. By pressing the „3D button“ when the
menu item is selected, you will change to the selection menu of that
item.
8. With the „F4(Delete)“ button you will delete the selected
menu item.
9. With the „F5(All)“ button you will insert all of the possible sub-
menu items into the user menu.
In both sections there are functions like throttle lock and servo
monitor which are accessible by using the „F1(THR)“ and
„F2(Receiver output)“ buttons.
4. 4.
1
2
3
4
98
7
66
5