User Manual

computer radio control system EN




12.15
T hr ottle Cut (Kill S wit ch)

This safety feature is mainly for models using glow or gasoline
engines as their main source of po w er . Electric models can also
highly benefit from this safety f eatur e . T he T hr ottle Cut function can
be activated using any assigned switch, knob or stick. By editing the
“Output Value” item, the throttle output will move to the user
defined (completely off ) throttle position once the assigned swit ch
is activat ed . When the T hr ottle C ut is ac tiv e , your throttle stick has no
effect on the throttle output.
Y ou can find the T hr ottle Cut menu in: „Advanced Proper ties ,
>Other Model Options, >Throttle Cut“.
12.16 T hr ottle Idle

This feature is used to set the idle position for your throttle and will
prevent your engine from shutting-off when you move throttle stick
to its low position.
T he minimum throttle setting is defined b y
editing the “Throttle-Idle Offset” value . When this function has
been activat ed , the minimum throttle setting (idle point) is defined
by the offset value as a per c entage . Standard throttle function is not
affected by the idle offset setting . Y ou can find the T hr ottle Cut menu
in: „Advanced Properties, >Other Model Options, >Throttle Idle“.