Data Sheet

4 Electrical Characteristics
Table 14 – cont’d from previous page
Parameter Conditions Min Typ Max Unit
Out-of-band blocking performance
30 MHz ~ 2000 MHz –10 — — dBm
2000 MHz ~ 2400 MHz –27 — — dBm
2500 MHz ~ 3000 MHz –27 — — dBm
3000 MHz ~ 12.5 GHz –10 — — dBm
Intermodulation — –36 — — dBm
4.6.2 Transmitter – Basic Data Rate
Table 15: Transmitter Characteristics – Basic Data Rate
Parameter Conditions Min Typ Max Unit
RF transmit power
*
- - 0 - dBm
Gain control step - - 3 - dB
RF power control range - –12 - +9 dBm
+20 dB bandwidth - - 0.9 - MHz
Adjacent channel transmit power
F = F0 ± 2 MHz - –55 - dBm
F = F0 ± 3 MHz - –55 - dBm
F = F0 ± > 3 MHz - –59 - dBm
∆ f1
avg
- - - 155 kHz
∆ f2
max
- 127 - - kHz
∆ f2
avg
/∆ f1
avg
- - 0.92 - -
ICFT - - –7 - kHz
Drift rate - - 0.7 - kHz/50 µs
Drift (DH1) - - 6 - kHz
Drift (DH5) - - 6 - kHz
*
There are a total of eight power levels from 0 to 7, and the transmit power ranges from –12 dBm to 9
dBm. When the power level rises by 1, the transmit power increases by 3 dB. Power level 4 is used by
default and the corresponding transmit power is 0 dBm.
4.6.3 Receiver – Enhanced Data Rate
Table 16: Receiver Characteristics – Enhanced Data Rate
Parameter Conditions Min Typ Max Unit
π/4 DQPSK
Sensitivity @0.01% BER — –90 –89 –88 dBm
Maximum received signal @0.01% BER — — 0 — dBm
Co-channel C/I — — 11 — dB
Adjacent channel selectivity C/I
F = F0 + 1 MHz — –7 — dB
F = F0 – 1 MHz — –7 — dB
F = F0 + 2 MHz — –25 — dB
F = F0 – 2 MHz — –35 — dB
F = F0 + 3 MHz — –25 — dB
Cont’d on next page
Espressif Systems 18
Submit Documentation Feedback
ESP32-PICO-MINI-02 & PICO-MINI-02U Datasheet v1.0