Datasheet

ESP32-S3-DevKitC-1 (click to enlarge)
Power Supply Options
There are three mutually exclusive ways to provide power to the board:
• USB-to-UART Port and ESP32-S3 USB Port (either one or both), default power
supply (recommended)
• 5V and G (GND) pins
• 3V3 and G (GND) pins
Header Block
The two tables below provide the Name and Function of the pins on both sides of the board (J1
and J3). The pin names are shown in ESP32-S3-DevKitC-1 - front. The numbering is the same as
in the Board Schematic (PDF).
J1