Use Instructions

TITLE: Neteera 130H/131H IFU
RELEASE DATE: 22-Mar-2021
DEPARTMENT: Product
EFFECTIVE DATE: 22-Mar-2021
NUMBER: IFU-000
REVISION: 1.1
Confidential
Page 14 of 26
4.3 Installation instructions
Please read the instructions carefully before beginning installation
The first step is to install the HW. Before you begin, please make sure you have:
All the required HW parts - main unit (130/131H) and the USB 2.0 cable.
An external device - PC/Tablet with the needed requirements.
“Neteera” SW (supplied by Neteera) on the external device.
Installation steps:
The front installations can be done within a minimum distance of 20 cm and up to 150 cm
from the subject’s body.
The lens located at the center of the product main unit should point to the center of mass
of the subject”s body. Meaning that it towards the subject’s torso.
The main unit should be parallel as possible to the subject’s body.
The device should be installed on a stable surface/location to avoid performance
disruptions.
NOTE: Back installation are possible and are defined as integration projects. The minimum
distance of a back installation is 5 cm from the subject.
The path of the Radar to the subject’s body should be clear from metal parts