User's Manual

Eleksen Connected Worker Operating Manual

Document 1

Version

1. Safety Regulations

1.1 Correct use

The HUB is part of an integrated Eleksen system which incorporates several elements.

The Eleksen Hub does not replace the primary safety devices.

This Hub and associated products and devices are designed to enhance the overall safety of the

wearer. By giving local visible and audio alerts/alarms to the wearer and other people within the

vicinity, so warning the user and fellow workers of the threat of danger.

Information gathered by the Hub from the associated devices will be transmitted to the control

centre. This information is gathered in real time and used to identify any perceived danger areas.

This information can be analysed and presented using a management information system to give

tabulated or graphical displays to enhance health and safety for the workforce.

When in use the Hub provides the wearer the ability to alert fellow workers and control centre, they

are in distress. The Hub and garment will go into alarm mode:

 Hub will vibrate (Haptic)

 Hub LED lights will flash

 Hub will emit a loud sound

 LED on garment will flash red (colour is configurable at time of order)

 In the control centre the ‘Dashboard’ will also go into alarm status giving visible and audio

alert

 Supervisor phone will be notified

 The Hub (wearer) will be identified and location displayed on the dashboard

 The nature of the alert will be displayed (i.e. SOS – Gas- Noise etc)

Appropriate action can be taken to address the alert – Evacuation, Search and Rescue, supervisory

intervention, local worker groups informed via the Eleksen communication system.