User's Manual

Eleksen Connected Worker Operating Manual
Document 1
-
Version
4
1
1
/
12
/
19
3.2 HUB Removed from Hub Station
3.2.1 HUB behaviour when removed from HUB Station
When the Hub has been removed from the Hub station the OLED will be blank while the Hub
performs a POST (power on self-test). During the POST the Hub will perform a range of
LED/Haptic/Sounder test cycles as detailed below.
Firmware release format:
Rele
ase level
DD/MM
V0.
11
06 06
Hub removed from Hub station.
2 Second
Sounder
1 Seconds
OLED Screen Icon with Firmware version 3 Seconds
Haptic Sounder