User's Manual

"
5. Compiling the SDK
3. Copy the files to be compiled to the shared folder.
4. Download shared directory.
5. Set the variable PATH to point to SDK and binaries.
export󰲧SDK_PATH=~/Share/ESP8266_RTOS_SDK
export󰲧BIN_PATH=~/Share/ESP8266_RTOS_SDK/bin
Steps
Results
• Copy ESP8266_NONOS_SDK folder to the
shared directory, for example, C:\VM\share.
• Copy IoT_Demo folder to C:
\VM\share\ESP8266_NONOS_SDK, as shown
in the figure on the right 👉 .
Steps
Results
• Execute ./mount.sh.
• Input the password: espressif."
Downloading shared files is completed.
• Open the shared directory
ESP8266_NONOS_SDK in the virtual machine
and confirm whether the download has been
successful.
- If successful, the directory contains such
files as those in the figure on the right 👉 .
- If not, the directory will be empty, and users
will need to go over this step again.
⚠ Notice:
If users use the RTOS SDK, please continue with the following steps; if use the non-OS SDK, please skip
Step 5.
📖 Note:
Users can add it to .bashrc file, otherwise Step 5 needs to be repeated each time the compiler is restarted.
Espressif
" /"12 23
2017.11