User's Manual

MākuSafe Wearable Device User Manual
2. The message, “Hi <User name>, have a safe workday!” will be displayed below your ID
on the screen, and a green light will flash around the bay that contains the wearable
device that is being checked out.
3. Remove the wearable device from the bay that is flashing green.
4. Insert the wearable device into the holster by sliding it downward into the holster. When
inserted properly, it will click into place. (Figure 7)
Figure 7
Submitting a Voice Memo
1. Push and hold the center button on the wearable device for 2 seconds. (Figure 8)
2. The LED on the wearable device will begin flashing red. (Figure 8)
Figure 8
Confidential  Page 6 of 10