User's Manual

!
2. Get Started on ESP32-PICO-KIT
2. Get Started on ESP32-PICO-
KIT
2.1. Preparation
To develop applications for ESP32-PICO-KIT you need:
• 1 × ESP32-PICO-KIT mini development board
•
1 × USB A / Micro USB B cable
• 1 × PC loaded with Windows, Linux or Mac OS
2.2. Standard Setup of Toolchain for Linux
The quickest way to start development with ESP32-PICO-KIT is by installing a prebuilt
toolchain. Pick up your OS below and follow provided instructions.
2.2.1. Install Prerequisites
To compile with ESP-IDF you need to get the following packages:
•
CentOS 7:
sudo󰲧yum󰲧install󰲧git󰲧wget󰲧make󰲧ncurses-devel󰲧flex󰲧bison󰲧gperf󰲧python󰲧pyserial
• Ubuntu and Debian:
sudo󰲧apt-get󰲧install󰲧git󰲧wget󰲧make󰲧libncurses-dev󰲧flex󰲧bison󰲧gperf󰲧python󰲧python-serial
• Arch:
sudo󰲧pacman󰲧-S󰲧--needed󰲧gcc󰲧git󰲧make󰲧ncurses󰲧flex󰲧bison󰲧gperf󰲧python2-pyserial
2.2.2. Toolchain Setup
ESP32 toolchain for Linux is available for download from Espressif website:
• for 64-bit Linux:
https://dl.espressif.com/dl/xtensa-esp32-elf-linux64-1.22.0-61-gab8375a-5.2.0.tar.gz
•
for 32-bit Linux:
https://dl.espressif.com/dl/xtensa-esp32-elf-linux32-1.22.0-61-gab8375a-5.2.0.tar.gz
Download this file, then extract it in ~/esp directory
mkdir󰲧-p󰲧~/esp
cd󰲧~/esp
tar󰲧-xzf󰲧~/Downloads/xtensa-esp32-elf-linux64-1.22.0-61-gab8375a-5.2.0.tar.gz
Espressif
! /123
2017.11