Installation Instructions

22
CONFIGURE YOUR LOCK ON THE APP
CONFIGURE YOUR LOCK ON THE KEYPAD
*
We recommend using the Espirit Lock app to program your lock. If you don’t want to
app to operate the lock, you can use the manual programming instructions.
Add a new
administrator
Clear all passcodes
or fingerprints
LOCK SETTINGS
11
All passcodes and admin passcode must be 6~9 digits in length; If you make a mistake
during programming, press E button twice to start over.
*
The data that was set or occurred on the keypad only can be uploaded and synced
from your lock in the Bluetooth connection range or you already paired a gateway that
allows you upload and sync it remotely.
Generate a passcode
or fingerprint
Change a passcode
Enabled/Disable
auto-lock
, touch the fingerprint reader with your finger
4 times, it will generate a permanent passcode or fingerprint
, all previous added passcode will be deleted.
, all previous added fingerprints will be deleted.
(0 or 5~999 Secs, 0 means turn
off this function, 5~999 means it will lock on the setting time)- .
, success.
, pair the lock on the app, once a new
administrator was added, all previous added admin passcode, passcodes and
fingerprints will be deleted automatically.
Programming
Descriptions