Repair manual

8
Cat. No. HYDRONIC and additional
equipment
Fig. No. / Designation
Cat. No.
1 HYDRONIC 16 - 24 V 25 2165 02 00 00
1 HYDRONIC 24 - 24 V 25 1817 02 00 00
2 HYDRONIC 24 - 24 V 25 1817 05 00 00
Compact model
1 HYDRONIC 30 - 24 V 25 1818 02 00 00
2 HYDRONIC 30 - 24 V 25 1818 05 00 00
Compact model
1 HYDRONIC 35 - 24 V 25 1819 02 00 00
2 HYDRONIC 35 - 24 V 25 2041 05 00 00
Compact model
Additional equipment which has to be ordered separately
3 “Bus 2000” water pump 25 1818 25 00 00
4 Water pump, 5000 I/h 25 1578 25 00 00
5 Hose clip, dia. 40 mm - 47 mm 152 00 158
6 Hose bend 38 mm dia. 360 00 300
7 Connecting pipe 38 mm dia. 25 1214 89 00 21
8 T-piece 38-38-38 mm dia. 25 1371 89 04 00
9 Reducing piece, 38/28 mm dia. 25 1214 89 00 19
10 Hose clip, dia. 32mm - 39 mm 152 61 097
11 Pipe bend, 38 mm dia. 25 1214 89 00 03
12 Water hose 38 mm dia. 360 75 096
13 Exhaust pipe connection
70 mm dia. 25 2025 89 01 00
14 Exhaust pipe connection
70 mm dia. 22 1000 40 04 00
15 Exhaust pipe bend 70 mm dia. 22 1000 40 03 00
16 Fuel filter 330 00 052
17 Hollow screw, M 14 x 15 104 10 040
18 Seal ring, A 14 x 18 323 16 006
19 Fuel intake pipe 25 1698 05 03 00
20 Screw coupling, M14 x 1,5 266 42 004
21 Spherical bush 263 35 080
22 Cap nut, M 14 x 15 116 10 040
23 Fuel pipe dia. 6 x 1 mm (copper),
per metre 080 16 003
24 Fuel hose dia. 5 x 3 mm 360 75 350
25 Hose clip 11 mm dia. 10 2063 01 10 98
26 Screw coupling, M 14 x 1.5 25 1706 05 01 00
27 Ball valve, M 14 x 1.5 330 00 019
28 Fuel return line 25 1698 05 04 00
29 Valve 330 00 210
30 Reducing joint 8/6 mm 266 00 026
31 Hood with hose connection 22 1000 40 06 00
32 1 m flexible hose, 60 mm dia. 10 2114 31 00 00
33 Hose clip 10 2064 05 00 70
34 Air hose fastening set 22 1000 50 02 00
35 Grille plastic 25 1688 80 06 00
2 / Product Information
Cat. No. Control element, optional
Quantity / Designation Cat. No.
1 Universal switch 25 1380 89 04 00
ON / OFF switch
Additionally required:
1 electric bulb 207 00 006
1 Mini-timer 12 / 24 V 22 1000 31 31 00
The mini-timer can be combined
with the TP 41i radio remote control.
1 Modular timer -12 / 24 V 22 1000 30 34 00
The modular timer can be combined
with the TP 41i radio remote control.
1 „Modular timer“ fasteners 25 1482 70 01 00
Only required where heater
is installed with trim panel
1 Radio remote control TP 4i 22 1000 30 99 00
12 / 24 V
The TP 4i radio remote control can only be used
in combination with the modular timer.
1 Radio remote control TP 41i 22 1000 31 39 00
12 / 24 V
The TP 41i radio remote control can be used
both independently and also in combination
with the mini-timer.
(Cat. No. of the mini-timer - 22 1000 31 31 00)
Please note!
Choice of control elements must be appropriate to
the purpose for which the HYDRONIC is to be used.
Selection criteria:
• switching on / off
• program preselection and / or remote control
Operating Instructions are enclosed with the control
elements. These are intended for the customer along
with the Operating Instructions for the HYDRONIC.
For other additional equipment, see Additional Equipment
Catalogue.