Repair manual

51
Certification
The Eberspächer company accepts the challenge and takes
active steps to avoid and eliminate ecological problems.
The HYDRONIC heater is designed for environmentally friendly
operation.
ISO 9000 / ISO 14001
Our production process is certified to ISO 9000 (quality
management) and ISO 14001 (environmental management).
QS 9000
In addition to ISO 9000, the Eberspächer company is certified
to QS9000 (extended quality management for the American
motor industry promoted by the manufacturers Ford, GM and
Chrysler) and VDA 6.1 (extended quality management for the
German motor industry).
7 / Environment
EU declaration of conformity
It is hereby confirmed for the following products - heater, type
HYDRONIC 16 / HYDRONIC 24
HYDRONIC 30 / HYDRONIC 35
that the heater complies with the essential protection
requirements laid down in Council Directive 89/336/EEC on
the approximation of the laws of the member states relating to
electromagnetic compatibility.
This declaration applies to all units which are manufactured
in accordance with manufacturing drawings HYDRONIC 16 /
HYDRONIC 24, HYDRONIC 30 / HYDRONIC 35 - which are
part of this declaration.
The following standards / directives have been used to assess
the product with regard to its electromagnetic compatibility
characteristics (EMC):
EN50081-1 Emissions
EN50082-1 Immunity
72/245/EEC - as amended by 95/54/EC on the
electromagnetic interference produced by
spark ignition engines
Disposal
Disposal of materials
Old heaters, faulty parts and packaging materials must be
sorted by type so that, if required, all parts can be disposed of
in an environmentally friendly fashion with recycling of
materials where appropriate. In this connection, electric
motors, control units and sensors (e.g. temperature sensors)
count as “electrical scrap”.
Heaters should be taken apart in accordance with the
provisions of this manual relating to repairs.
Packaging
The heater packaging can be retained in case it needs to be
sent back.