Operating instructions

7
IInnssttaallllaattiioonn PPrroocceedduurreess
PPrriinncciippaall DDiimmeennssiioonnss -- BBooxxeedd VVeerrssiioonn
Always mount the heater in a protected area. Eg: storage
compartment, engine compartments, step box or battery box.
Espar recommends you use the boxed unit. Boxed heaters
can be mounted by utilizing one of the existing brackets. See
following page.
When mounting the heater adhere to the following conditions:
• Situate the heater below the normal coolant level of the engine.
• Guard against excessive road spray.
• Keep coolant hoses, fuel lines and electrical wiring as
short as possible.
Mount the heater using the four (4) shock mounts provided
and one of the following mounting methods:
• Use the
CCrroossss FFrraammee MMoouunnttiinngg TTrraayy
to mount the
heater behind the cab and on top of the frame rails.
• Use the
SSiiddee MMoouunntt BBrraacckkeett
to mount the heater on the
side of the frame rail.
• Use a spare step box or battery box.
• Use the saddle bracket and hardware provided
CCaauuttiioonn::
Guard the heater against excessive road
spray to avoid internal corrosion.
HHeeaatteerr LLooccaattiioonn
HHeeaatteerr MMoouunnttiinngg
Espar Heater Systems
CCrroossss FFrraammee MMoouunnttiinngg TTrraayy
P/N CA0 10 028
P/N CA0 10 022 with hardware
SSiiddee MMoouunntt BBrraacckkeett
P/N CA0 10 057