User`s guide

Recording With Remote Control 33
Low Battery & Low Memory Indication
About ten minutes before the battery reaches a low
level, the remote control motor will vibrate in ten
short pulses. The same warning is given if
remaining space on the Microdrive becomes too
low.
When you receive this signal, you should prepare to
leave the recording location, to recharge and/or
replace Microdrive.
Alarm Indication
When the remote control cable vibrates
continuously, this is an alarm. Press the remote
control button to stop the vibration.
An alarm indicates one of the following:
The camera cable has been disconnected (lost
video-sync).
The Microdrive card has been removed or
dislodged.