User`s guide

16 Getting Started
To format the Microdrive card:
1. Insert the Microdrive card, with the printed side
facing down, as shown in the image below. Push
it in until it latches.
2. With the tip of a pen or pencil, gently press the
ERASE Card until the green light, located on the right of the
REC button, ashes for 10 seconds as the disk is erased.
Wait for the light to turn o.
5. Connecting the A/V Cable
The A/V cable has two RCA-type sockets on one
end, and a 3.5mm plug on the other end, which
connects to the STING.