User`s guide

Introduction
Sting II User Guide 7
Connecting the A/V Cable
The A/V cable has two RCA-type sockets on one end, and a 3.5mm plug on
the other end, which connects to the STING II.
To connect the A/V cable to the STING II:
• Plug the 3.5mm plug into the Video In socket on the STING II. Make
sure it is plugged all the way into the center hole.
Connecting a Camera or Microphone
You can connect any video camera to the STING. If the camera operates on
5VDC, it can draw its power from the Camera Power Out socket, as long
as the current consumption does not exceed 200mA. If the camera does
not comply with these requirements, it should be powered by its own
battery.
Alternatively, you can connect an amplified microphone, or any other
device that sends out a line-level signal. An amplified button microphone is
sold separately.