User`s guide

Remote Access
Sting II User Guide 48
WebCam (Full resolution)
Select WebCam (Full resolution) to display the current camera view in
real time (one frame per second). The view is displayed in the full area of
the Preview window. The display is updated every few seconds.
WebCam (CIF resolution)
Select WebCam (CIF resolution) to display the current camera view in
real time. The view is displayed in a portion of the Preview window and is
updated every few seconds. Because it only uses a portion of the Preview
window, it uses fewer resources to update the image and therefore displays
more images in a shorter period of time.
Upgrade Firmware
You can upgrade the firmware on the STING II either via a USB connection
with the STING II directly, or via an Ethernet connection and the Internet.
Connect to the STING II via the remote Web interface and click Upgrade
Firmware to access and upload a new version.
Change Password
You can change the STING II password used for encryption via the Web
interface by selecting Change Password and then entering the following
the current password and then a new password (between 2 and 8
characters). You must then re-enter the new password in the Confirm
New Password field. Click OK to change the password.
System Status
Select System Status to display the following information (read-only):
• Software version: the current version number installed on the
STING II.
• Board revision: the current version of the STING II Board.
• Compact flash status: total space and percentage available.
• USB disk presence (or None).
• Video Status (NTSC or PAL)
• Recording: whether the unit is currently recording or not
• Motion Detection: what setting is currently in effect for the motion
detection setting