User`s guide

Remote Access
Sting II User Guide 46
If the MAC address appears as all zeros, this indicates
that there is not Ethernet connectivity between the STING
II and the router. Check the connections and then verify
the MAC address again.
Some routers may require a crossed cable to enable
successful communication with the STING II.
Once connectivity is established, the login screen appears.
Logging In
To log in:
Once you have established a local or remote connection, the login screen
appears.
Enter the user name and password and click OK to enter the remote access
Web interface.
By default, the STING II user name and password are both “admin.” These
can and should be changed either in the STING II Media Center or via the
Setup settings. Once you complete the login process, the STING II Web
Interface window opens.