User`s guide

Using the STING II Media Center
Sting II User Guide 44
To set a password:
The STING II needs to be connected via the USB in order to access the
STING II Media Center to create or change the password.
1. Enter the new password in the New Password field of the STING II
Media Center.
2. In the Confirm Password field, enter the exact password again.
3. Click Set Password to save the password.
After you set the password and click Set Password, you need to shut off
the Sting and then turn it back on again so that the new password will take
effect.
Firmware Version
You can check what Firmware version is installed on the STING II by
connecting the Sting via the USB cable to your computer and opening the
STING II Media Center. Click Firmware Version. The version number will
be displayed.
The firmware file name is sys.bif. Typically, a standard upgrade will take at
least 7 minutes. A progress bar is displayed in the browser, indicating the
progress of the upgrade process. You should not disconnect the STING II
until the upgrade process is completed.