User`s guide

Using the STING II Media Center
Sting II User Guide 42
Verifying the Authenticity of Files and Images (Watermark)
The STING II automatically includes Watermarked Files
To verify that files have not been tampered or edited:
1. Using the Remote Control, press the MENU key once to access the
Setup software.
2. Press ENTER to open the Event Library. You will see a list of files on
the left side of the window.
3. You can use the UP and DOWN keys on the STING II remote control
to navigate through the files on the displayed page. To move to
another page, use the LEFT and RIGHT keys. Navigate to the file
you wish to verify.
4. Click ENTER to access the Event Library menu.
5. On the menu, use the UP and DOWN keys to navigate. In this case,
select VERIFY and press ENTER. If the original file was edited in any way,
you will see on the System Messages area: “File is not original!!!!!!”
Configuration Options in the Media Center
Configuration options in the Media Center include:
• Setting the video quality
• Viewing any system messages related to actions in the Media Center
• Selecting a recording setting
• Assigning a password
• Viewing the current firmware version
Video Quality
The current video quality of each recording session is configured in the
Media Center in the Video Quality section. Select from High, Medium, Low
or Very Low. In general, the higher the quality setting, the larger the file
will be.
If there is no storage problem, you may choose to set the video quality at a
higher level. On the other hand, if space on the compact disk may be a
problem, you may choose to record at a lower quality and thus be able to
record for a longer period of time.