User`s guide

Setup Software
Sting II User Guide 31
Typically, you will use the NEVER setting to enable you to position the
camera in cases where you want to perform surveillance from a fixed
location. Once the camera is in position and you change the setting, the
STING II is programmed to automatically continue giving power to 5-volt
connection while the camera is in record mode.
As soon as you next indicate that you want to record, power to the 5-volt
connection (and to the external camera) is immediately activated. When
you stop recording, the power-save mode will begin after the specified
period of time (or never, if you selected NEVER).
Video Output Std.
You can set the video output according to one of the following standards:
• PAL
• NTSC