User`s guide

Setup Software
Sting II User Guide 29
Encrypted Files
STING II can encrypt all files so you can make sure no one but you or the
person that has the password can view the recorded files. Encrypted files
can only be decrypted with a password (set in the STING II Media Center)
from within the STING II Media Center.
WARNING: If you forget the password, it is impossible
to
decrypt and view the files.
To enable encryption of files:
1. Using the Remote Control, press the MENU key once to access the
Setup software.
2. Press DOWN to highlight the Setup option and press ENTER to
access the Setup window.
3. Press RIGHT to navigate to the Media tab.
4. Press ENTER to navigate to the Encrypted Files option.
5. Select either ON or OFF. The default value is OFF.
System Tab
The System tab of the Setup menu enables you to:
• Return the STING II to the factory default settings originally
programmed into the unit.
• Set the camera power save mode.
• Specify the date and time format to be used as a date stamp on all
files.
• Set the current date and time (this is the time that will be used in the
date/time stamp.