User`s guide

Setup Software
Sting II User Guide 23
• Motion Detection
• Noise Sensitivity
• Size
• Speed Sensitivity
Motion Detection
There are three options related to the Motion Detection capabilities of the
STING II:
Option Description
Off Motion Detection is not activated. The unit will
only begin recording when activated manually.
Display Motion detection is activated on this display. A
red grid indicates where motion has been
detected.
Trigger Motion detection is activated each time
movement is detected in the designated area
and a recording session is triggered. If no
movement is detected in the area under
observation for 30 seconds, the unit will stop
recording until movement is again detected.
By default, the STING II’s Motion Detection is set to off, meaning that the
unit is not triggered to record based on motion.