User`s guide

Setup Software
Sting II User Guide 22
• Bottom left
• Bottom right
Time Date Stamp Colour
You can set the color that the time stamp appears on the image or video.
The default value is Transparent White.
To set or modify the Time Date Stamp Colour:
1. Using the Remote Control, press the MENU key once to access the
Setup software.
2. Press DOWN to highlight the Setup option and press ENTER to
access the Setup window.
3. Use the DOWN key again to navigate to the Time Stamp Colour
option and then press Enter. Use the DOWN key to navigate to the
preferred option:
• Opaque
• Transparent White
• Transparent Black
4. Press ENTER to apply your selection.
Motion Tab
STING II can be activated automatically when motion is detected in the
recording area. You can set the noise, size and speed sensitivity to filter out
insignificant data.
When enabled, the STING II will record for 30 seconds following any
movement within the target area (according to the sensitivity settings
specified in the configuration).
The current value is displayed in red next to each option. The Motion tab
contains the following options: