User`s guide

Setup Software
Sting II User Guide 21
The default value is DATE TIME, indicating that both the current date and
time will be stamped and visible in each file.
To set or modify the Time Stamp:
1. Using the Remote Control, press the MENU key once to access the
Setup software.
2. Press DOWN to highlight the Setup option and press ENTER to
access the Setup window.
3. Use the DOWN key again to navigate to the Time Date Stamp option
and then press Enter.
Select one of the following:
• NONE
• DATE TIME
• TIME
Time Date Stamp Position
You can select the location that the time Date stamp is displayed in the
picture of video recording using the Time Stamp Position option. The
default value is TOP LEFT.
To set or modify the Time Stamp Position:
1. Using the Remote Control, press the ENTER key once to access the
Setup software.
2. Press DOWN to highlight the Setup option and press ENTER to
access the Setup window.
3. Use the DOWN key again to navigate to the Time Stamp Position
option and then press Enter. Select one of the following:
• Top left
• Top right